Milestone XProtect Smart Client 3.0; User’s Manual
www.milestonesys.com Page 27 Views
Renaming Views or Groups
Note: Your ability to edit views and groups depends on your user rights. Basically, if you are able
to create the view or group, you are also able to edit it.
To rename a view or group, do the following on the Setup tab:
1. Select the required view or group in the Views section.
2. Click the Rename button:
3. Overwrite the existing group name with a new name of your choice.
Deleting Views or groups
IMPORTANT: Deleting a group will delete all views and any subgroups within the group as well.
Note: Your ability to edit and delete views and groups depends on your user rights. Basically, if
you are able to create the view or group, you are also able to edit and delete it.
To delete a view or group, do the following on the Setup tab:
1. Select the required view or group in the Views section.
2. Click the Delete button:
You will be asked to confirm that you want to delete the selected view or group.
Using Your Views on Different Computers
Your user settings, including information about your views, are stored centrally on the surveillance
system server.
This means that you are able to use your views, private as well as shared, on any computer that
has a Smart Client installed, provided you log in to the Smart Client with your own user name and
password.
Note: From time to time your system administrator may make changes to camera or user
properties on the Milestone XProtect Enterprise server. When this is the case, such changes will
take effect in the Smart Client the first time you log in after the changes were made. Such changes
may occasionally require you to re-create your views. Ask your system administrator if in doubt.
How to Add Content to Views
Once you have created views (see page 21), you are able to add content to the views.
