Milestone XProtect Smart Client 3.0; User’s Manual
www.milestonesys.com Page 33 Views
3. Click the OK link.
Changing the Properties of an HTML Page
Once an HTML page is added to a view, you are able to change its properties by doing the
following:
1. On the Setup tab, select the imported HTML page in the view. Properties of the selected
HTML page will appear in the Setup tab’s Properties section.
2. Change the required property:
Url: Click the New button to specify a new URL or location of the required HTML
page.
Scaling: Select the required scaling of the HTML page. The optimal scaling
depends entirely on the content of the imported HTML page and how you want to
display it.
As a rule of thumb, with a high scaling value, e.g. 1280×1024, text on the HTML
page will appear relatively small, and a considerable amount of content will be
visible without the need for scrolling. With a low scaling value, e.g. 320×200, text
on the HTML page will appear relatively large, and a relatively small amount of
content can be displayed without the need for scrolling.
Examples of the same HTML page viewed with different
scaling values
Enable HTML scripting: Select only if the HTML page is a custom-made HTML
page to be used for navigating or triggering features inside the Smart Client itself
(see examples of such custom-made HTML pages in Using an HTML Page for Smart
Client Navigation on page 43).
If selected, a client script required for navigating and controlling a number of
features inside the Smart Client will be added to the HTML page. For HTML pages
which are not going to be used for such purposes, the client script cannot be used,
and may even cause the HTML page to malfunction.
