Tektronix WFM 601M Wheelchair User Manual


 
WFM 601A, WFM 601E & WFM 601M User Manual
Index–1
Index
A
Aberrations, serial channel measurements, 3–23
Accessories, 1–2
optional accessories, 1–3
Options, 1–3
standard (included), 1–2
Accuracy, Glossary–1
Active PIC CRC Error, in Configure SER ALARM
menu, 3–11
AFC, synchronization selection, 3–11
Air filter, part number, 1–2
ALARM, 2–4
Alarm
based on serial format checks, 3–44
Gamut alarm, 3–33
ALARM DISP, in Configure GAMUT menu, 3–10
Amplitude, serial channel measurements, 3–22
Analog Audio, see Audio, 3–1
ANC Checksum, Serial format checks, 3–49
ANC Parity, Serial format checks, 3–48
AP CRC, using to measure error rate, 3–51
AP CRC ERR SEC, Serial format selection, 3–46
Arrowhead Display
composite gamut, 3–31
NTSC and PAL graticules, 3–31
setting format, 3–32
Audio
analog signals, 3–1
display, 3–1
gain, 3–4
graticule calibrations, 3–4
Lissajous patterns, 3–1
measuring phase error, 3–4
Serial format selection, 3–46
Audio display, 1–26, 2–3
Automatic, format checks, 3–44
B
Bowtie Display, 3–5
relative gain check, 3–6
timing measurement, 3–6
Buttons, functional overview, 2–2
C
Cabinetizing, 1–8
Cabinets, 1–5
1700F00, 1–3
blank panel, 1–10
Cable Length
measurement, 3–49
measurement for firmware V1.X, 3–47
Cable Screen, 3–49
CABLE TYPE
for firmware V1.X, 3–47
serial format selection, 3–50
CAL SIG, configuration menu, 3–12
Calibrate
CONFIG menu, 3–12
gain, 3–12
Calibration, 3–7
horizontal gain, 3–7
vertical gain, 3–7
Calibrator, calibration signal, 1–2
Certifications and Compliances, A–11
Changed Since Reset, Serial format selection, 3–46
Check, after shipment, 1–15
Cleaning, the instrument, D–3
Cleaning Fan Filter, D–1
CLEAR MENU, 2–5
Clock BW, in Configure EYE PATTERN menu, 3–10
Color Bars, in Configure WFM/VEC menu, 3–9
Command set, C–1
Component video, Glossary–1
Composite, setting Gamut alarm, 3–33
Composite gamut
checking, 3–32
Diamond Display, 3–31
Composite video, Glossary–1
CONFIG menu, map of functions, 3–8, 3–9
Configuration menu
Calibrate CAL SIG, 3–12
Calibrate GAIN CAL, 3–12
Configure menu
Calibrate description, 3–12
description, 3–8
Eye Pattern description, 3–10
Eye pattern filters, 3–19
Format description, 3–11
Gamut description, 3–10
Jitter description, 3–10
Jitter Display settings, 3–38
map of functions, 3–9
SER ARM description, 3–11
WFM/VEC description, 3–9
Connector
compatibility, 1–14