Filter
Top Products
Preset Commands
C–46
WFM 601A, WFM 601E & WFM 601M User Manual
Preset Commands
The commands in this section allow you to select, store, and name parameter
presets for the waveform monitor. Use the command UIMENU:PREset (page
C–15) to enable the preset functions.
PREset:REcall <PRESETn | FACTORY >
Recalls the Preset stored in the named location. The preset function allows you
to store up to ten front panel setups: Nine user defined presets and one factory
preset. The factory preset is programmed to assist in calibrating the instrument.
The letter n in the argument <PRESETn> represents a number between 1 and 9.
PREset:REcall <PRESETn | FACTORY >
<PRESETn | FACTORY >
preset:rec factory
None
PREset:STORE <PRESETn>
Deletes the currently stored setting in the named memory location and replaces it
with the current front panel settings. The letter n in the argument <PRESETn>
represents a number between 1 and 9. (The waveform monitor can store 9 presets
in addition to the FACTORY preset.)
PREset:STORE <PRESETn>
<PRESETn>
preset:store preset1
None
Syntax
Arguments
Examples
Returns
Syntax
Arguments
Examples
Returns