Tektronix WFM 601M Wheelchair User Manual


 
Cable Measurement Commands
C–4
WFM 601A, WFM 601E & WFM 601M User Manual
SLM:SOURCE? (WFM 601E and WFM 601M Only)
Returns the power (Signal Level readout) of the source as a percent of an
800 mV signal. This command works only with V2.X firmware. See the
corresponding V1.X firmware command SLM:LEVEL.
SLM:[SOURCE]?
None
slm:source?
:SLM:SOURCE 95 PERCENT
SLM:RCVR? (WFM 601E and WFM 601M Only)
Returns a dB value for the power lost in the cable. This command works only
with V2.X firmware. To ensure a correct measurement, use the command
SLM:CABLE to indicate the cable type you are using.
SLM:[RCVR]?
None
slm:rcvr?
:SLM:RCVR 2 dB
Syntax
Arguments
Examples
Returns
Syntax
Arguments
Examples
Returns