Filter
Top Products
Instruction Manual
IM-106-340, Rev. 4.0
May 2006
2-7
Oxymitter 4000
Figure 2-5. Oxymitter 4000
Adapter Plate Installation
35830005
0.50 13()
3.75 95()
Minimum Dia
hole in wall
Stack or duct
metal wall
Mounting holes
shown rotated 45
o
Weld or bolt mounting plate to metal wall
of stack or duct; Joint must be air tight.
0.50 13()
4.50 114()
O.D. Ref
Pipe 4.00 in. Sched 40 Pipe
Sleeve (Not by
Rosemount Analytical)
length by Customer
Masonry
stack wall
Outside wall
surface
Joint must
be air tight
Mounting Holes
shown rotated 45
of true position
o
Field weld pipe
to adapter plate
Bolt mounting plate to
outside wall surface
2.50 (63,5)
Minimum Dia
hole in wall
Stack or duct
metal wall
Weld or bolt adapter plate to
metal wall of stack or duct.
Joint must be air tight.
Field weld pipe
to adapter plate
3.5 (89)
O.D. Ref
Pipe 3.00 in. Sched 40 Pipe
Sleeve (Not by
Rosemount Analytical)
length by Customer
Masonry
stack wall
Outside wall
surface
Joint must
be air tight
Bolt adapter plate to
outside wall surface
INSTALLATION FOR MASONRY
WALL STACK CONSTRUCTION
INSTALLATION FOR METAL WALL
STACK OR DUCT CONSTRUCTION
Notes:
1. Dimensions are in with
in parentheses.
inches
millimeters
out of true position
out
2. All masonry stack work and joints except adaptor
plate are not furnished by Rosemont Analytical.