Filter
Top Products
Oxymitter 4000
1-18
Instruction Manual
IM-106-340, Rev. 4.0
May 2006
Table 1-1. Product Matrix
OXT4A Oxymitter 4000 In Situ Oxygen Transmitter
Oxygen Transmitter - Instruction Book
Code Sensing Probe Type
1 ANSI (N. American Std.) Probe with Ceramic Diffuser
2 ANSI Probe with Flame Arrestor and Ceramic Diffuser
3 ANSI Probe with Snubber Diffuser
4 DIN (European Std.) Probe with Ceramic Diffuser
5 DIN Probe with Flame Arrestor and Snubber Diffuser
6 DIN Probe with Snubber Diffuser
Code Probe Assembly
0 18 in. (457 mm) Probe
1 18 in. (457 mm) Probe with Abrasive Shield
(1)
2 3 ft (0,91 m) Probe
3 3 ft (0,91 m) Probe with Abrasive Shield
(1)
4 6 ft (1,83 m) Probe
5 6 ft (1,83 m) Probe with Abrasive Shield
(1)
6 9 ft (2,74 m) Probe
7 9 ft (2,74 m) Probe with Abrasive Shield
(1)
8 12 ft (3,66 m) Probe
9 12 ft (3,66 m) Probe with Abrasive Shield
(1)
A 15 ft (4,57 m) Probe with Abrasive Shield
(1)
B 18 ft (5,49 m) Probe with Abrasive Shield
(1)
Code Mounting Hardware- Stack Side
0 No Mounting Hardware ("0" must be chosen under "Mounting Hardware - Probe Side" below)
1 New Installation - Square weld plate with studs
2 Mounting to Model 218 Mounting Plate (with Model 218 Shield Removed)
3 Mounting to Existing Model 218 Support Shield
4 Mounting to Other Mounting
(2)
5 Mounting to Model 132 Adapter Plate
Code Mounting Hardware- Probe Side
0 No Mounting Hardware
1 Probe Only (ANSI) (N. American Std.)
2 New Bypass or New Abrasive Shield (ANSI)
4 Probe Only (DIN)
5 New Bypass or New Abrasive Shield (DIN)
Code Electronic Housing & Filtered Customer Termination - NEMA 4X, IP66
12 HART Integral Electronics, Transient Protected Filtered Termination, ATEX
Certification
14 Remote Electronics with Transient Protected Filtered Termination
(requires cable)
OXT4C331112 Example