Filter
Top Products
7
Know your Breville ikon™ Baker’s Oven continued
THE CONTROL PANEL
The Control Panel is designed to perform several functions. The LCD screen indicates the setting selected,
loaf size, crust colour, etc. and the completion time for the setting. The various buttons are used to select the
functions and to start or stop the Breville ikon™ Baker’s Oven.
LCD
SCREEN
The LCD Screen shows the setting, loaf size, crust colour and dispenser operation. When the START/PAUSE button is pressed to
commence operation, the time displayed (in hours and minutes) is the time remaining until the selected setting is completed.
SELECT
Press the SELECT button to access the variety of automatic settings available. These settings are listed on page 8. Each time the
SELECT button is pressed the setting is changed. The setting selected is indicated by a black arrow appearing on the right-hand side of
the LCD Screen or the appropriate wording on the LCD Screen.
CRUST
Press the CRUST button to select the 3 crust colours available on the Basic and Wholemeal bread settings only. The setting selected is
indicated by a black arrow appearing on the left-hand side of the LCD Screen. This button also selects the Rapid function for Basic and
Wholemeal breads.
NUTS
Press the NUTS button if ingredients are to be dispensed from the Fruit and Nut Dispenser. This button can be pressed before or after
the START/PAUSE button is pressed to commence operation. The words ‘YES NUTS’ will appear on the LCD Screen.
LOAF SIZE
Press the LOAF SIZE button to select the required loaf size. The LCD Screen automatically indicates 1250g. If the 1000g loaf or the
750g loaf is preferred, press the LOAF SIZE button and the LCD Screen will show the change. The LOAF SIZE button is only available on
the BASIC, WHOLE WHEAT, FRENCH, SWEET and GLUTEN FREE bread settings. Only the 1250g loaf or 1000g loaf can be selected on the
GLUTEN FREE bread setting.
BEEPER
Press the BEEPER button to turn the ‘beeps’ on or off. When the BEEPER button is selected to sound the beeps at the appropriate time
in the selected setting, the BEEPER light above the LCD Screen illuminates. The BEEPER button beeps once when selected to on but
does not beep when it is turned off and the BEEPER light goes out.
MANUAL
SET
The MANUAL SET button accesses the function that allows you to use your own personal recipe in the ikon™ Baker’s Oven. You can
choose the timing for each cycle of the program and also the baking temperature. For example, in a humid climate the rising cycles can
be reduced or, if a crustier loaf is preferred, the baking time and temperature can be increased. Follow the guidelines for the MANUAL
SET function (Refer page 12).
TIME/TEMP
The TIME/TEMP button is used with:
BAKE ONLY setting (Refer page 11)
MANUAL SET function (Refer page 12)
a)
b)
PRESET
TIMER
(up ‘’/down
‘’ arrows)
The UP AND DOWN ARROWS have three functions:
To use the PRESET TIMER (Refer page 10)
To use the TIME/TEMP feature for the BAKE ONLY setting (Refer page 11)
To use the MANUAL SET function (Refer page 12)
a)
b)
c)
START/
PAUSE
The START/PAUSE button has two functions:
Press the START/PAUSE button to commence the selected setting
Press the START/PAUSE button during operation to interrupt a cycle. The Pause function allows you to be creative with your bread
making by pausing the machine for 10 minutes. The Pause function can be activated in any cycle of any setting except the KEEP
WARM cycle.
a)
b)
STOP
To stop and cancel a setting during operation press and hold down the STOP button for 1-3 seconds until the beeps sound. The LCD
Screen will reset to show BASIC BREAD 1250g 3:20 MEDIUM.
KEEP
WARM / IN
PROGRESS
LIGHT
The KEEP WARM/IN PROGRESS Light on the control panel will illuminate and remain steady when the ikon™ Baker’s Oven is in
operation and progressing through the cycles. The KEEP WARM/IN PROGRESS Light will flash during the 60 minute KEEP WARM cycle at
the end of a bread making setting. When a setting time is complete the ikon™ Baker’s Oven will show 0:00 and ‘KEEP WARM’ on the
LCD Screen. The bread machine is cooling and will remain in the KEEP WARM cycle for another 60 minutes but the time remaining will
not show on the screen.
VIEWING
LIGHT
Press and hold the LIGHT button at the top of the control panel to illuminate the interior cavity of the bread machine. The light will not
remain on unless the LIGHT button is held down.
Power Failure Protection
The ikon™ Baker’s Oven has a built-in Power Failure Protection system. If the power supply is interrupted for 60 minutes or less, the ikon™ Baker’s
Oven will automatically resume the cycle when power is restored. For the Power Failure Protection System to activate, the bread machine must be
operating for a minimum of 5 minutes. If the power is not restored within 60 minutes it is recommended to discard the ingredients, particularly when
using perishable ingredients, such as dairy products, eggs, etc.