Filter
Top Products
12
Beginner’s Guide to Baking Your First Loaf
The PRESET TIMER can be used with the MANUAL SET function. Use the Up ▲ or Down ▼ Arrow button to set the required time (until finish)
after SET appears on the LCD Screen (after the 13th press).
If the Fruit and Nut Dispenser and/or the Beeps for adding other ingredients are required, ensure KNEAD 2 is programmed for at least 20
minutes. The Dispenser and Beeps activate at 17 minutes into the total kneading cycle.
Know your Breville ikon™ Baker’s Oven continued
OPERATION LCD SCREEN ACTION
1st Press Shows the total time for the last recipe programmed and the
NUTS selected.
2nd Press PRE-HEAT 0
Press Up ▲ Arrow button to enter time
- maximum 60 minutes or Down ▼ button to 0.00
3rd Press KNEAD 1 0
Press Up ▲ Arrow button to enter time
- maximum 60 minutes or Down ▼ button to 0.00
4th Press KNEAD 2 0
Press Up ▲ Arrow button to enter time
- maximum 60 minutes or Down ▼ button to 0.00
5th Press RISE 1 0
Press Up ▲ Arrow button to enter time
- maximum 100 minutes or Down ▼ button to 0.00
6th Press PUNCH DOWN :00
Press Up ▲ Arrow button to enter time
- maximum 60 seconds or Down ▼ button to 0.00
7th Press RISE 2 0
Press Up ▲ Arrow button to enter time
- maximum 100 minutes or Down ▼ button to 0.00
8th Press SHAPING :00
Press Up ▲ Arrow button to enter time
- maximum 60 seconds or Down ▼ button to 0.00
9th Press RISE 3 0
Press Up ▲ Arrow button to enter time
- maximum 100 minutes or Down ▼ button to 0.00
10th Press BAKE 0
Press Up ▲ Arrow button to enter time
- maximum 150 minutes or Down ▼ button to 0.00
11th Press NUTS (YES OR NO)
Press Up ▲ Arrow button for YES
or Down ▼ button to NO
12th Press
0°C
Press Up ▲ Arrow button to increase - maximum 150°C or Down ▼ button
to decrease to 0°C
13th Press
Shows total time for the current recipe programmed and
the NUTS selected. The word SET appears in the lower
right-hand side corner. (Two beeps sound if the BEEPER is
turned on).
The MANUAL SET function has now been reprogrammed. (If you wish to
check the times and temperature programmed you can do so now by using
the MANUAL SET button to progress through 1st press to 13th press). Then
press the START/PAUSE button to commence operation.
MANUAL SET FOR YOUR PERSONAL RECIPES
The MANUAL SET function allows you to program your own personal
recipe cycle times and baking temperature into the ikon™ Baker’s
Oven. You can choose how long you want for each cycle of the program.
For example, in a humid climate the rising cycles can be reduced or
if a crustier loaf is preferred the baking time and temperature can be
increased.
The Panettone recipe on page R33 is an example of how to use the
MANUAL SET function.
The memory of the ikon™ Baker’s Oven will save and recall the times and
temperature of the last personal recipe programmed into the MANUAL SET
function.
Procedure:
Press MANUAL SET following the steps shown on page 12 starting with
1st press through to 13th press. PERSONAL RECIPE will show on the
LCD screen through out the function.
Use the Up ▲ or Down ▼ Arrow button to increase or decrease
the cycle times, the temperature of the BAKE cycle and to select the
NUTS dispenser and/or add-in beeps. Use the sequence charts at
the beginning of each section as a guide for programming times and
temperature.
Press the BEEPER button if the beeps are required.
Press START/PAUSE button to commence operation.
1)
2)
3)
4)