Filter
Top Products
21
Control Panel Messages
ERROR DETECTION
When the START/PAUSE button has been pressed to commence operation and there is a problem relating to the sensor, the machine will beep and flash
the particular error message specific to the problem. There are 5 different messages.
ERROR
MESSAGE
PROBLEM CORRECTION
--H
Attempting to use the bread machine shortly after a
previous loaf has been baked and its interior will still
be too warm, that is, the sensor temperature will still
be above 40°C.
Press STOP, open the lid, remove the bread pan and allow the oven cavity
sufficient time to cool.
Refer to ‘Beginner’s guide to baking your first loaf’ Step 14, Page 15.
-H
Attempting to use the bread machine shortly after a
previous loaf has been baked and its interior will still
be too warm.
Press STOP, open the lid, remove the bread pan and allow the oven cavity
sufficient time to cool. Ensure there are sufficient ingredients in the bread
pan.
--L
The bread machine is used in an extremely cold
environment.
Place the bread machine in a warmer environment. Recommended room
temperature 20-25ºC.
E:02
Contact your nearest authorised Breville Service Centre (refer to the back
page for details).
E:03
Contact your nearest authorised Breville Service Centre (refer to the back
page for details).