Filter
Top Products
Celeron™ Processor Development Kit Manual
1-1
About This Manual
1
This manual tells you how to set up and use the evaluation board and processor assembly included
in your Celeron™ Processor Development Kit.
1.1 Content Overview
Chapter 1, “About This Manual” - This chapter contains a description of conventions used in this
manual. The last few sections tell you how to obtain literature and contact customer support.
Chapter 2, “Getting Started” - Provides complete instructions on how to configure the evaluation
board and processor assembly by setting jumpers, connecting peripherals, providing power, and
configuring the BIOS.
Chapter 3, “Theory of Operation” - This chapter provides information on the system design.
Chapter 4, “Hardware Reference” - This chapter provides a description of jumper settings and
functions, and pinout information for each connector.
Chapter 5, “BIOS Quick Reference” - This chapter describes how to configure the BIOS for your
system configuration. A summary of all BIOS menu options is provided.
Appendix A, “PLD Code Listing” - This appendix includes a sample code listing for the Post Code
Debugger.
Appendix B, “Bill of Materials” - This appendix contains the bill of materials for the evaluation
board.
Appendix C, “Schematics” - This appendix contains schematics for selected connectors and
subsystems for the evaluation board.
1.2 Text Conventions
The following notations may be used throughout this manual.
# The pound symbol (#) appended to a signal name indicates that the
signal is active low.
Variables Variables are shown in italics. Variables must be replaced with correct
values.
Instructions Instruction mnemonics are shown in uppercase. When you are
programming, instructions are not case-sensitive. You may use either
upper- or lowercase.