Filter
Top Products
Celeron™ Processor Development Kit Manual
4-13
Hardware Reference
4.8 In-Circuit BIOS Update
The BIOS can be upgraded in-circuit. BIOS updates may periodically be posted to Intel’s
Developers’ site at http://www.intel.com/design/.
To reprogram the BIOS:
1. Set Jumper J21 and Jumper J22 to the 1-2 position on the evaluation platform.
2. Download the new BIOS upgrade file from Intel’s Developers’ web site.
3. Extract the BIOS upgrade zip file onto a bootable floppy.
4. Insert the floppy disk into the floppy drive attached to the evaluation board.
5. Reboot the evaluation board so that it boots from the floppy.
6. Follow the on-screen instructions.
7. When the BIOS update program is finished, power down the board and reset the jumpers at
J21 and J22 to the 2-3 position.