Filter
Top Products
2-2
Celeron™ Processor Development Kit Manual
Getting Started
2.1.2 Baseboard Features
The baseboard has these features:
• Flash system BIOS ROM
— General Software system BIOS
— In-circuit BIOS upgradability
• Two SDRAM DIMM connectors
• 32-Mbyte SDRAM DIMM included
— 4 Mbyte x64, 3.3 V, 66 MHz with a CAS latency of 2
• User-accessible on-board connectors include:
— Two serial RS-232 ports; COM1, COM2
— One EPP/ECP parallel port
— PS/2 keyboard and PS/2 mouse (6-pin mini-DIN connectors)
— Two USB ports
— Two IDE bus connectors
— One floppy connector
— Three PCI expansion slots and two ISA expansion slots. There are no shared slots; all
slots are usable.
— One AGP connector
— Standard ATX power supply connector
• Miscellaneous features include:
— On board post-code debugger (Port 80)
— Reset push button
— Stand-off feet for table-top operation
2.2 Included Hardware
• Evaluation board (baseboard and processor assembly combination)
• 3.2-Gbyte hard disk drive pre-loaded with the QNX Real Time Operating System*
• 32-Mbyte SDRAM DIMM
• Attached heatsink and fan
• PCI video graphics adapter using the CHIPS* 69000 HiQVideo* Accelerator
• Mounting hardware
• IDE cable for the hard disk drive