Filter
Top Products
Reference Manual
00809-0100-4663, Rev BA
January 2010
Rosemount 8732
www.rosemount.com
Appendix B Approval Information
Product Certifications . . . . . . . . . . . . . . . . . . . . . . . . . . . . page B-1
Approved Manufacturing Locations . . . . . . . . . . . . . . . . . page B-1
European Directive Information . . . . . . . . . . . . . . . . . . . . page B-1
Hazardous Locations Product Approvals Offering . . . . . page B-3
Hazardous Location Certifications . . . . . . . . . . . . . . . . . . page B-5
PRODUCT
CERTIFICATIONS
Approved Manufacturing Locations
Rosemount Inc. — Eden Prairie, Minnesota, USA
Fisher-Rosemount Technologias de Flujo, S.A. de C.V. —
Chihuahua Mexico
Emerson Process Management Flow — Ede, The Netherlands
Emerson Process Management Flow Technologies Co., Ltd. — Nanjing, China
European Directive Information
The EC declaration of conformity for all applicable European directives for this product can be
found on our website at www.rosemount.com. A hard copy may be obtained by contacting our
local sales office.
ATEX Directive
Rosemount Inc. complies with the ATEX Directive.
Type n protection type in accordance with EN50 021
• Closing of entries in the device must be carried out using the appropriate EExe or EExn metal
cable gland and metal blanking plug or any appropriate ATEX approved cable gland and
blanking plug with IP66 rating certified by an EU approved certification body.
For Rosemount 8732E transmitters:
Complies with Essential Health and Safety Requirements:
EN 60079-0: 2006
IEC 60079-1: 2007
EN 60079-7: 2007
EN 60079-11: 2007
EN 60079-26: 2004
EN 50281-1-1: 1998 + A1
European Pressure Equipment Directive (PED) (97/23/EC)
Rosemount 8705 and 8707 Magnetic Flowmeter sensors in line size and flange
combinations:
Line Size: 1
1
/2 in. - 24 in. with all DIN flanges and ANSI 150 and
ANSI 300 flanges. Also available with ANSI 600 flanges in limited line sizes.
Line Size: 30 in. - 36 in. with AWWA 125 flanges
QS Certificate of Assessment - EC No. PED-H-20
Module H Conformity Assessment
Rosemount 8711 Magnetic Flowmeter Sensors
Line Sizes: 1.5, 2, 3, 4, 6, and 8 in.
QS Certificate of Assessment - EC No. PED-H-20
Module H Conformity Assessment