Emerson Process Management 8732 Oxygen Equipment User Manual


 
Reference Manual
00809-0100-4663, Rev BA
January 2010
Rosemount 8732
www.rosemount.com
Section 3 Configuration
Introduction . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . page 3-1
Local Operator Interface . . . . . . . . . . . . . . . . . . . . . . . . . . page 3-1
Basic Features . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . page 3-1
LOI Examples . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . page 3-2
Diagnostic Messages . . . . . . . . . . . . . . . . . . . . . . . . . . . . . page 3-5
Process Variables . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . page 3-5
Basic Setup . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . page 3-7
INTRODUCTION This section covers basic operation, software functionality, and configuration
procedures for the Rosemount 8732 Magnetic Flowmeter Transmitter. For
information on connecting another manufacturer’s flowtube sensor, refer to
“Universal Sensor Wiring Diagrams” on page E-1.
The Rosemount 8732 features a full range of software functions for
configuration of output from the transmitter. Software functions are accessed
through the LOI, AMS, a Handheld Communicator, or a control system.
Configuration variables may be changed at any time and specific instructions
are provided through on-screen instructions.
LOCAL OPERATOR
INTERFACE
The optional Local Operator Interface (LOI) provides an operator
communications center for the 8732. By using the LOI, the operator can
access any transmitter function for changing configuration parameter settings,
checking totalized values, or other functions. The LOI is integral to the
transmitter electronics.
BASIC FEATURES The basic features of the LOI include 4 navigational arrow keys that are used
to access the menu structure. See Figure 3-1.
Table 3-1. Parameters
Basic Set-up Parameters Page
Review page 3-5
Process Variables page 3-5
Basic Setup page 3-7
Flow Units page 3-7
Range Values page 3-10
PV Sensor/Flowtube Sensor Calibration Number page 3-11
Totalizer Setup page 3-6