Emerson Process Management 8732 Oxygen Equipment User Manual


 
Reference Manual
00809-0100-4663, Rev BA
January 2010
4-13
Rosemount 8732
Cal Min Span
The PV minimum span is the minimum flow range that must separate the
minimum and maximum configured PV Range values.
Reverse Flow
Enable or disable the transmitter’s ability to read reverse flow.
Reverse Flow allows the transmitter to read negative flow. This may occur
when flow in the pipe is going the negative direction, or when either electrode
wires or coil wires are reversed. This also enables the totalizer to count in the
reverse direction.
Display Language This allows you to configure the language shown on the display. There are
five options available:
English
Spanish
Portuguese
•German
•French
Signal Processing The 8732E contains several advanced functions that can be used to stabilize
erratic outputs caused by process noise. The signal processing menu
contains this functionality.
Operating Mode
The Operating Mode should be used only when the signal is noisy and gives
an unstable output. Filter mode automatically uses 37 Hz coil drive mode and
activates signal processing at the factory set default values. When using filter
mode, perform an auto zero with no flow and a full sensor. Either of the
parameters, coil drive mode or signal processing, may still be changed
individually. Turning Signal Processing off or changing the coil drive frequency
to 5 Hz will automatically change the Operating Mode from filter mode to
normal mode.
Man Config DSP
Manually configure the digital signal processing parameters.
The 8732E transmitter includes digital signal processing capabilities that can
be used to condition the output from the transmitter by enabling noise
rejection. See Appendix D: Digital Signal Processing for more information on
the DSP functionality.
375 Transducer Block, Detailed Setup, Additional Params
375 Transducer Block, Detailed Setup, Additional Params
375 Transducer Block, Detailed
Setup
375 Transducer Block, Detailed
Setup
375 Transducer Block, Detailed Setup, Signal Processing
375 Transducer Block, Detailed Setup, Signal Processing