Filter
Top Products
Reference Manual
00809-0100-4663, Rev BA
January 2010
Rosemount 8732
www.rosemount.com
Appendix D Digital Signal Processing
Safety Messages . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . page D-1
Procedures . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . page D-2
SAFETY MESSAGES Instructions and procedures in this section may require special precautions to
ensure the safety of the personnel performing the operations. Please read the
following safety messages before performing any operation described in this
section.
Warnings
Explosions could result in death or serious injury:
• Verify that the operating atmosphere of the sensor and transmitter is consistent
with the appropriate hazardous locations certifications.
• Do not remove the transmitter cover in explosive atmospheres when the circuit is
alive.
• Before connecting a Field Communicator in an explosive atmosphere, make sure
the instruments in the loop are installed in accordance with intrinsically safe or
non-incendive field wiring practices.
• Both transmitter covers must be fully engaged to meet explosion-proof
requirements.
Failure to follow safe installation and servicing guidelines could result in death or
serious injury:
• Make sure only qualified personnel perform the installation.
• Do not perform any service other than those contained in this manual unless
qualified.
Process leaks could result in death or serious injury:
• The electrode compartment may contain line pressure; it must be depressurized
before the cover is removed.
High voltage that may be present on leads could cause electrical shock:
• Avoid contact with leads and terminals.