Filter
Top Products
Reference Manual
00809-0100-4663, Rev BA
January 2010
Rosemount 8732
3-2
Figure 3-1. Local Operator
Interface Keypad
Data Entry The LOI keypad does not have numerical keys. Numerical data is entered by
the following procedure.
1. Access the appropriate function.
2. Use the RIGHT ARROW key to move to the value to change.
3. Use the UP and DOWN ARROWS to change the highlighted value.
For numerical data, toggle through the digits 0–9, decimal point, and
dash. For alphabetical data, toggle through the letters of the alphabet
A–Z, digits 0–9, and the symbols ,&, +, -, *, /, $, @,%, and the blank
space.
4. Use the RIGHT ARROWS to highlight other digits you want to change
and change them.
5. Press “E” (the left arrow key) when all changes are complete to save
the entered values.
LOI EXAMPLES Use the DOWN ARROW to access the menu structure in Table 3-2. Use the
ARROW KEYS to select the desired parameters to review/change.
Parameters are set in one of two ways, Table Values or Select Values.
Table Values:
Parameters such as units, that are available from a predefined list
Select Values:
Parameters that consist of a user-created number or character string, such
as calibration number; values are entered one character at a time using
the ARROW KEYS.