Filter
Top Products
6. ASSEMBLY
BAS-311G, BAS-326G
84
6-14. Work clamp arm mechanism
1. Feed plate
2. Bolts with washer [2pcs]
3. Work clamp assy
4. Plain washers [4 pcs]
5. Spring washers [4 pcs]
6. Bolts [4 pcs]
A
fter installing, carry out test feeding and check that the needle hole is inside the work clamp and the feed plate
frame. If the needle hole is not inside the frame, adjust the position of the work clamp arm assembly and feed plate.
Pneumatic s
p
ecifications
5200Q
5201Q