Filter
Top Products
7. ADJUSTMENT
BAS-311G, BAS-326G
105
5
Press the RESET key.
• The work clamp will move to the home position. Check
the home position.
7
Repeat steps 4 and 5 to adjust the home position.
8
End adjustment mode.
TEST indicator switches off
Press the TEST key.
• The display will return to the normal display and the
sewing machine will switch to home position detection
standby.
NOTE:
Always be sure to press the RESET key and check the home position before ending adjustment mode. If you end
adjustment mode without checking the home position, error "E303" may be generated.
7-20-2. X-Y feed home position
1
Turn the pulley to set the needle to the needle up stop position.
2
TEST indicator and X-SCALE indicator light
While pressing the
keys simultaneously, turn on
the power switch.
* Keep pressing the
keys until the model name is
displayed and the buzzer beeps once.
• "orG" will flash in the PROGRAM No. display and the
offset value (default: 0) will be displayed in the menu
display.
3
Press the SELECT key so that either the X-SCALE
indicator or the Y-SCALE indicator illuminates.
4
Press the RESET key.
• Home position detection will be carried out, and the feed mechanism will stop at the
currently-registered home position.
* If you press the RESET key for 2 seconds or more at this time, the offset value will be reset
to “ 0 ”.
4570Q
5205Q 4443Q 4421Q