Filter
Top Products
3. READING / WRITING DATA
27
BAS-311G, BAS-326G
3-6. Writing sewing data to CF cards
1
Select the [w 2] data read/write mode.
2
Press the R/W key.
• [SEd-] will change to [ ALL].
Press the
or key to select the program numbers (100 − 999) to be
written.
* If you select [ ALL], all sewing data (Nos. 100 − 999) will be written at
once.
[When memory switch No. 755 is ON]
The program numbers (0 − 99) will also be displayed and can be
selected. If you select [ ALL] at this time, all sewing data (Nos. 0 − 999)
will be written at once.
3
Writing
Press the R/W key.
• The buzzer will sound and the selected sewing data will be copied from
the internal memory onto the CF card.
• The program numbers that have been written will appear in the
PROGRAM No. display.
* If there is a large volume of data in the internal memory, it will take
some time for all of it to be written. To halt the writing of data, press the
STOP switch. If you then press the RESET key, the display will change
back to [ ALL].
4
End data read/write mode
TEST indicator switches off
Press the TEST key.
Turn off the power switch, remove the CF card, and then close the cover
of the CF slot.
4578Q
4577Q
4977Q