Filter
Top Products
6. ASSEMBLY
BAS-311G, BAS-326G
59
16. Driving leve
r
17. Thread trimmer collar
18. Collar shaft
19. Retaining ring, E
20. Set screw
21. Thread trimmer rod V
22. Shoulder screw B
23. Nut
24. Guide shaft
25. Spring
26. Cushion
27. Set screw
28. Thread trimmer solenoid
29. Solenoid setting plate
30. Plain washers [2 pcs]
31. Spring washers [2 pcs]
32. Bolts [2 pcs]
33. Solenoid cushion
34. Washer
35. Solenoid lever
36. Set screw
37. Bolts with washer [2 pcs]
38. Pushing lever
39. Shoulder screw
40. Set screw
41. Nut
42. Connecting plate
43. Shoulder screw
44. Shoulder screw B
45. Nut
46. Plain washer
47. Spring washer
48. Bolt
When the ball joint assembly o
f
thread trimmer rod V has been
disassembled, assemble it so tha
t
the distance between the centers o
f
the holes is 287.5 ± 0.5 mm.
4615Q
4853Q
5136Q
Tighten the set screw on the scre
w
flat while lightly pressing the colla
r
shaft.
Check that the thread trimmer colla
r
turns smoothly.
A
ssemble so that the wick is
hanging down.
Apply grease.