Filter
Top Products
6. ASSEMBLY
BAS-311G, BAS-326G
67
26. Feed bracket X
27. Bolts M3X6 [8 pcs]
28. Bolts M4X8 [2 pcs]
29. Flat screws [8 pcs]
30. X-belt holder
31. X-belt holder plate
32. Bolts [2 pcs]
5176Q
5177Q
Push the X-LM guide against the
positioning pins of the feed
bracket and then tighten the
bolts.
Engage.
18. Y-LM spacers [2 pcs]
19. Flat screws [16 pcs]
20. Y-LM guides [2 pcs]
21. Plain washers [8 pcs]
22. Spring washers [8 pcs]
23. Bolts [8 pcs]
24. X-LM guide [2 pcs]
25. Bolts [8 pcs]
Install the X-belt holder in between the X-LM guides as
shown in the diagram.
5215Q
Provisionally tighten the bolts so
that their heads do not protrude
from the top of the X-LM guide on
the inside.