Filter
Top Products
2. FUNCTION SETTINGS
14
BAS-311G, BAS-326G
Unique machine settings
No.
Setting
range
Setting items Initial value
Automatic start for extended option output No. 1
OFF Disabled
950
ON Sewing machine starts when extended option output No. 1 is ON.
OFF
Program number output
OFF Disabled
951
ON
When the last two digits of the program number are 1 to 15, the program number
is output in 4 bits to extended option output 4 − 7.
OFF
2-5. Setting the work clamp mode
Combinations of memory switch settings can be used to switch the work clamp operating mode to any one of the following
modes.
<Solenoid specifications, single pedal standard operations>
Operating mode Memory switch setting
Drop operation
Automatic work
clamp lifting
After home position detection After sewing start 003 050 057 058
Automatic lift 0 1 ON OFF
Automatic lift
Dropped 0 1 ON ON
Automatic lift 0 1 OFF OFF
Yes
Dropped (*)
Dropped (*) 0 1 OFF ON
Analog drop
No Dropped (*) Dropped (*) 0 2
− −
Automatic lift 1 1 ON OFF
Automatic lift
Dropped 1 1 ON ON
Automatic lift 1 1 OFF OFF
Yes
Dropped (*)
Dropped (*) 1 1 OFF ON
1st step drop
No Dropped (*) Dropped (*) 1 2
− −
Automatic lift 2 1 ON OFF
Automatic lift
Dropped 2 1 ON ON
Automatic lift 2 1 OFF OFF
Yes
Dropped (*)
Dropped (*) 2 1 OFF ON
2nd step drop
No Dropped (*) Dropped (*) 2 2
− −
(*) If memory switch No. 057 is OFF, the work clamp will lift when the pedal is depressed backward.
<Solenoid specifications, single pedal sequence operation>
Operating mode Memory switch setting
Drop operation
Automatic work
clamp lifting
After home position detection After sewing start 003 050 057 058
Automatic lift 1 8 ON OFF
Automatic lift
Dropped (*) 1 8 ON ON
Automatic lift 1 8 OFF OFF
1st step drop Yes
Dropped (*)
Dropped (*) 1 8 OFF ON
Automatic lift 2 8 ON OFF
Automatic lift
Dropped (*) 2 8 ON ON
Automatic lift 2 8 OFF OFF
2nd step drop Yes
Dropped (*)
Dropped (*) 2 8 OFF ON
(*) Work clamp lifts when pedal is depressed backward.