Filter
Top Products
2. FUNCTION SETTINGS
9
BAS-311G, BAS-326G
Feed settings
No.
Setting
range
Setting items Initial value
Mechanism home position return when sewing is finished
OFF When sewing is finished, the feed plate returns to the start position.
250
ON
When sewing is finished, the feed plate moves via the machine home position to
the start position.
OFF
Feed speed
1 100 mm/s Slow
2 200 mm/s
3 300 mm/s
4 400 mm/s
251
5 500 mm/s Fast
3
High-speed test feeding
OFF
Feeding is normally slow, and becomes faster when the foot switch is depressed
to the 1st step
(For 2 pedals, it becomes faster when the work clamp switch is depressed.)
252
ON
Test feeding is at the same speed as sewing.
* This does not apply to checking stitch by stitch.
OFF
Home position detection method
OFF Depress the foot switch (start switch) while the PROGRAM No. display is flashing.
253
ON
Press the special external input switch (EXIN3) while the PROGRAM No. display
is flashing. (Foot switch/start switch are disabled.)
OFF
Movement path from mechanism home position to start position
0
Moves to the start position simultaneously for X and Y, in the order of in front of Y
→ middle of X.
1
Moves to start position in the order of X start point → Y start point in the order of in
front of Y → middle of X.
2
Moves to start position in the order of right edge of X → Y start point → X start
point in the order of right edge of X → in front of Y.
254
3
Moves to start position in the order of left edge of X → Y start point → X start point
in the order of left edge of X → in front of Y.
0
Changes the overall feed timing
260
-10 − 10 -10: Early ← 0: Standard → 10: Late
0
Changes the feed timing for the 1st stitch at the sewing start
261
-10 − 10 -10: Early ← 0: Standard → 10: Late
0
Changes the feed timing for the 2nd stitch at the sewing start
262
-10 − 10 -10: Early ← 0: Standard → 10: Late
0
Changes the feed timing for the 3rd stitch at the sewing start
263
-10 − 10 -10: Early ← 0: Standard → 10: Late
0
Changes the feed timing for the 3rd stitch before the sewing end
264
-10 − 10 -10: Early ← 0: Standard → 10: Late
0
Changes the feed timing for the 2nd stitch before the sewing end
265
-10 − 10 -10: Early ← 0: Standard → 10: Late
0
Changes the feed timing for the 1st stitch before the sewing end
266
-10 − 10 -10: Early ← 0: Standard → 10: Late
0
If the overall feed timing (setting for No. 260) is changed from the default value, specify the
number of applicable stitches.
0 No limit
267
1 − 99
The feed timing returns to the standard feed timing once the specified number of
stitches has been sewn.
0
Changes feed timing standard
0 [Feed start reference] Makes the timing uniform at the start of feed.
1
[Needle up reference] Changes the timing at the start of feed so that the needle
zigzagging is even.
2 [Feed end reference] Makes the timing uniform at the end of feed.
268
3 [Linked to speed] Feed timing is uniform even if the sewing speed changes.
1
Adjusts the feed motor output
269
-5 − 5 -5: Low← 0: Standard → 5: High
0