Filter
Top Products
6. ASSEMBLY
BAS-311G, BAS-326G
73
6-7. Feed covers
1. Fixed cover R
2. Fixed cover L
3. Cover rail
4. Screws M4X10 [6 pcs]
5. Screws M4X4 [2 pcs]
6. Inside cover R assy (Place into cover rail.)
7. Inside cover L assy (Place into cover rail.)
8. Outside cover assemblies [2 pcs]
(Place into cover rail.)
9. Cover connecting plate
10. Screws [2 pcs]
11. Cover rail
12. Screws M4X10 [6 pcs]
13. Screws M4X4 [2 pcs]
14. Bellow assy
15. Screws [4 pcs]
1) Place the inside cover into the groove in the X feed bracket.
Apply grease (MOLYKOTE LONGTERM W2 manufactured
by Dow Corning or equivalent) to the areas indicated by the
white arrows.
2) Set so that the rubber part of the inside cover is on the
outside of the rubber part of the outside cover and so that the
stopper of the inside cover is on the inside of the fixed cover.
5188Q 5189Q
5190Q
Place the inside cover into the upper cove
r
rail, and place the outside cover into the lowe
r
cover rail.
5187Q
Feed bracket X