Filter
Top Products
2. FUNCTION SETTINGS
21
BAS-311G, BAS-326G
PROGRAM No. display
Menu display
Check code Name
Operating details
[ 61] [ CUt] Turns on the thread trimming solenoid.
[ 62] [ rEL] / [dtEn]
Turns on the tension release solenoid/digital tension solenoid.
(*2)
However, in the case of digital tension, the solenoid turns on at the tension
that has been set.
[ 63] [ WiP] Turns on the thread wiper solenoid.
[ 64] [StEP] Turns on the option solenoid. [Option compatibility]
[ 65] [ oP1] Turns on option output 1.
[ 66] [ oP2] Turns on option output 2.
[ 67] [ oP3] Turns on option output 3.
[ 68] [ oP4] Turns on option output 4.
[ 69] [ oP5] Turns on option output 5.
[ 70] [ oP6] Turns on option output 6.
[ 71] [ oP7] Turns on option output 7.
[ 72] [ oP8] Turns on option output 8.
[ 73] [ oP9] Turns on option output 9.
[ 74] [oP10] Turns on option output 10.
[ 75] [oP11] Turns on option output 11.
[ 76] [oP17] Turns on option output 17.
[ 77] [oP18] Turns on option output 18.
[ 78] [oP19] Turns on option output 19.
[ 79] [oP20] Turns on option output 20.
*2 Can be determined automatically using a connector shorting pin.