Filter
Top Products
2. FUNCTION SETTINGS
10
BAS-311G, BAS-326G
Operation panel settings
No.
Setting
range
Setting items Initial value
Operation panel changing limitation
0 No limits on changing setting values using the operation panel.
1
Program numbers, XY scale, sewing speed, lower thread counter, work clamp
height, intermittent height and digital tension values cannot be changed.
2
Program numbers, XY scale, sewing speed, work clamp height, intermittent height
and digital tension values cannot be changed.
3 Program numbers cannot be changed.
4 Program numbers and XY scale settings cannot be changed.
5 Program numbers, XY scale and sewing speed settings cannot be changed.
6 XY scale settings cannot be enlarged. (They can be reduced.)
350
7 Sewing speed setting cannot be changed.
0
Changing memory switches
OFF Allowed
351
ON Forbidden
OFF
Counting method for lower thread counter and production counter
0 Counted for each item of sewing data
1 Counted for each thread trimming operation.
352
2 Counted when sewing data ends or when split stops
0
Counter timing for lower thread counter
OFF Counted at the end of sewing.
353
ON Counted at the start of sewing.
OFF
Switching program numbers using an external switch
0 Disabled
354
1 − 9
Program number is switched by means of the 5 bits of option input (EXIN6 −
EXIN10).
Applicable numbers are: Setting number = 3rd digit, last two digits can be 1 − 31.
0
Switches split numbers using an external switch
OFF Disabled
355
ON
Split number is switched by means of the 5 bits of option input (EXIN6 − EXIN10).
Applicable numbers are 1 − 31 (only enabled for independent split mode)
OFF
User program settings
No.
Setting
range
Setting items Initial value
Moving to start point when switching user programs
OFF Feed moves to the start point after starting and switching.
450
ON
Feed moves to the next sewing start point at the same time as the user program
switches.
OFF
Limitations on changing settings for user programs
OFF No limit
452
ON User program contents cannot be changed.
OFF