Filter
Top Products
3. READING / WRITING DATA
31
BAS-311G, BAS-326G
3-12. Writing error log data to CF card
1
Select the [w 8] data read/write mode.
2
Writing
Press the R/W key.
• The buzzer will sound and the error log data will be
copied from the internal memory onto the CF card.
3
End data read/write mode
TEST indicator switches off
Press the TEST key.
Turn off the power switch, remove the CF card, and then
close the cover of the CF slot.
3-13. Reading sewing data from floppy disks
1
Insert the floppy disk into the floppy disk drive.
2
Select the [r 9] data read/write mode.
3
Press the R/W key.
• [-Fdd] will change to [ ALL].
Press the
or key to select the program number to be read.
* Program numbers that contain no data will also be displayed at this
time.
* If [ ALL] is selected, all sewing data will be read at once.
5061Q
4579Q
5062Q
4577Q