Filter
Top Products
2. FUNCTION SETTINGS
20
BAS-311G, BAS-326G
2-9. Output checking method
Use this to check for any malfunctions of the circuit boards, and for checking for problems with drive mechanisms and
broken cords.
You can check whether the signals being output by the CPU are driving the mechanisms correctly.
1. While pressing the
key (1), turn on the power switch.
* Keep pressing the key (1) until the model name is
displayed and the buzzer beeps once.
The check code will be displayed in the PROGRAM No.
display (2), and the abbreviated name of the output will
be displayed in the menu display (3).
2. Press the key (4) or key (1) to select the desired
check code.
3. The operations for check codes 51 to 54 can be
checked by pressing the or key (5).
4. For check codes 55 and onward, depress the foot
switch to the 2nd step.
(If using a two-pedal foot switch, lower the work clamp
before depressing the start switch (6). )
5. To return to normal operation, turn off the power switch
and then turn it back on again.
PROGRAM No. display
Menu display
Check code Name
Operating details
[ 51] [PM-X]
When the
key is pressed, the work clamp moves to the left.
When the key is pressed, the work clamp moves to the right.
[ 52] [PM-y]
When the
key is pressed, the work clamp moves forward.
When the key is pressed, the work clamp moves back.
[ 53] [PM-F]
When the
key is pressed, the work clamp lifts.
When the
key is pressed, the work clamp drops.
[ 54] [CAtH]
When the
key is pressed, the thread nipper moves to the home position.
When the
key is pressed, the thread nipper moves to the retract position.
[Option compatibility]
[ 55] [CL-r] Right clamp valve turns on. (OUT16) (*1)
[ 56] [CL-L] Left clamp valve turns on. (OUT15) (*1)
[ 57] [Foot] Intermittent presser foot valve turns on. (OUT14) (*1)
[ 58] [FLiP] Inner clamping device valve turns on. (OUT13) (*1)
[ 59] [CooL] Needle cooler valve turns on. (OUT12) (*1)
[ 60]
The panel LEDs illuminate in order, and then the seven segments of the
PROGRAM No. display and the menu display illuminate one by one.
*1 Applies for pneumatic specifications when corresponding devices are installed.
The corresponding operation for the check code will
be carried out while the foot switch is being
depressed (while the foot switch has been depressed
once for check code 60).
2nd step
4441Q 4953Q
4567Q