Filter
Top Products
Related Products 1 Basic Operation
11
Measurement Server Extensions
The measurement server extensions connect to the MMS and use the MMS settings and power. Trend
data and measurement settings from the measurements in the extensions are stored in the measurement
server. To separate an extension from the MMS, press the release lever down, and push the server
forward.
M3001A Connectors and Symbols
1 White ECG/Resp connector
2 Blue SpO
2
connector
3 Red NBP connector
4 &
5
Combined pressure (red) and temperature
(brown) connector - connect either invasive
pressure transducer or temperature probe.
You might have a version of the MMS that
does not have this connector.
6
NBP Start/Stop key -
starts or stops NBP
measurements
7
NBP STAT key - starts NBP
STAT series of
measurements
OR
Zero key - initiates a zero procedure for the
connected pressure transducer when
pressed and held for a second
8
Silence: acknowledges all active
alarms by switching off audible
alarm indicators and lamps
9
MSL cable connector to the monitor
1
2
3
4
5
9
7
6
8
3