Filter
Top Products
OneTouch® Diabetes Management Software v2.3.1 User Manual 50
Table of Contents
| Index W Previous Next X
Table of Contents
| Index W Previous Next X 50
General Tab (cont.)
When you see this: You can do this:
Units of Measure Specify whether you want readings displayed in
OneTouch
®
DMS Reports as mg/dL (milligrams per
deciliter) or mmol/L (millimoles per liter) units. Click
on the down arrow in the Unit of Measure field.
Then select the desired option from the drop-down
menu. The unit of measure selected here will be
used for glucose, cholesterol and triglycerides data.
If the meter is set to mmol/L units, and you select
mg/dL as your display option, OneTouch
®
DMS
will automatically convert the readings for display
purposes. The units setting on the meter will not
be affected.
Show Result As Specify whether glucose readings will be displayed
in OneTouch
®
DMS Reports as either Whole Blood
readings or Plasma readings. Click on the down
arrow in the Show Result as field. Then select the
desired option from the drop-down menu.
Note: To view results the same way they appear in the
meter, refer to your meter display where the glucose
unit of measure appears with the test result, and set
the Show Result as option to display the same units.