Filter
Top Products
OneTouch® Diabetes Management Software v2.3.1 User Manual 41
Table of Contents
| Index W Previous Next X
Table of Contents
| Index W Previous Next X 41
Using the schedule to assign meter readings to time slots:
When readings are transferred from the meter to
OneTouch
®
DMS, they are tagged with a time stamp
and are automatically assigned time slots. If you decide
to modify meal slot times, you will impact only those
readings that have not yet been transferred. Readings
already in OneTouch
®
DMS will maintain their existing
meal slot designation. For this reason, it is important to
note if schedule times are appropriate before you transfer
readings. It is also important to synchronize your meter
clock with that of the PC (assuming the PC clock is correct), to ensure that future readings
are slotted correctly. OneTouch
®
DMS will notify you if your PC and meter clocks are out of
sync by more than 15 minutes.
Using comments/events to assign meter readings to time slots:
Depending on meter type, some OneTouch
®
Meters allow you
to tag a reading with a meal slot comment. Such readings will
be assigned to the same meal slot by the OneTouch
®
DMS
application, even if they are taken at a time outside the meal
slot range. For example, a reading with a “Before- Breakfast”
comment/event would be assigned to the Before-Breakfast
time slot even if it were taken outside that time slot. This feature
applies only to the OneTouch
®
UltraSmart
®
and OneTouch
®
Profile
®
Meters. For all other OneTouch
®
Meters, readings are
assigned to time slots using the actual time of the reading.
Sep-08-05 10:00AM
104
mg/dL