Filter
Top Products
SECTION 11—WHEELS AND CASTERS
Part No. 1125078 69 At’m and At’m QT
FIGURE 11.2 Replacing Forks - Adjusting Forks
Removing/Installing the Drive Wheels
ƽ WARNING
Maintain tire pressure at 30 p.s.i. Otherwise, the wheelchair may not drive cor-
rectly, stop correctly or may experience erratic performance.
NOTE: For this procedure, refer to FIGURE 11.3 on page 70.
Removing
1. Disengage the motors. Refer to Engaging/Disengaging the Motors on page 56.
2. Push and hold the quick-release button on the drive axle and pull the drive wheel out
of the wheelchair frame.
3. Repeat STEPS 1-2 for the other drive wheel.
Installing
1. Align drive axle with the wheelchair frame.
2. Push and hold the quick-release button on the drive wheel and push the drive wheel
into the wheelchair frame.
3. Engage the motor. Refer to Engaging/Disengaging the Motors on page 56.
4. Repeat STEPS 1-3 for the other drive wheel.
Front Caster
Locknut
Fork
Washer
Headtube Cap
Caster Headtube
Fork Stem