Filter
Top Products
SECTION 8—BATTERIES
Part No. 1125078 51 At’m and At’m QT
Installing
1. Install the battery box assembly, joystick plug bracket and anti-tippers onto the base
frame using the four locknuts, eight washers, four hex head screws and twelve coved
washers.
2. Install the battery connector to the battery box assembly using the two Phillips screws
and locknuts.
3. Install the two rear wheels. Refer to Removing/Installing the Drive Wheels on page 69.
4. Connect the joystick. Refer to Disconnecting/Connecting the Joystick on page 40.
FIGURE 8.6 Removing/Installing the At’tm QT Battery Box Assembly
Hex Head Screws
Phillips Screws
Joystick Plug Bracket
Locknuts
Locknuts
Anti-Tipper
Washer
Coved
Washers
Top Battery Receiver
Bottom Battery Receiver
Battery
Connector
Coved
Washers
Wheelchair Base
NOTE: The battery box assembly comprises the top and bottom battery receivers.
Washers
Hex Head Screw