Filter
Top Products
SECTION 7—JOYSTICK
At’m and At’m QT 42 Part No. 1125078
Installing
1. Align the mounting bracket assembly with the mounting holes on the arm.
2. Install the two quick-release pins that mount the joystick to the arm.
3. Secure the joystick cable to the wheelchair arm with three tie-wraps. Refer to Detail
“A” of FIGURE 7.2.
4. Secure the joystick cable to the wheelchair frame with three tie-wraps.
5. Secure the hook-and-loop fastening strap, over the cable and tie-wrap, to the base
frame.
NOTE: Route the joystick cable under the basket upholstery to prevent it from interfering with
wheelchair motion.
6. Connect the joystick. Refer to Disconnecting/Connecting the Joystick on page 40.
FIGURE 7.2 Removing/Installing the Joystick
Mounting
Hole on Arm
Mounting Holes
on Bracket
Quick-Release
Pins
Joystick
Mounting
Bracket
DETAIL “A” - AT’M
Joystick
Cable
Tie-Wrap
Tie-Wrap
Tie-Wrap under Flap
(Hidden from View)
Basket
Upholstery
Flap
Joystick
DETAIL “B” - AT’M QT
NOTE: At’m wheelchair shown. The joystick
on the At’m QT repositions the same way.
Tie-Wrap
Tie-Wrap
Joystick
Basket
Upholstery Flap
Joystick
Cable
Joystick
Cable