Filter
Top Products
SECTION 6—ARMS
Part No. 1125078 39 At’m and At’m QT
Removing/Installing Arm Tube
NOTE: For this procedure, refer to FIGURE 6.3.
Removing
1. If needed, remove the joystick. Refer to Removing/Installing the Joystick on page 41.
2. Remove arm pad. Refer to Removing/Installing Arm Pads on page 37.
3. Remove the mounting bolt, two nylon spacers, three coved washers, locknut, and
washer attaching arm tube to rear seat tube.
4. Repeat for other arm tube if necessary.
Installing
1. Secure the arm tube to the rear seat tube with the mounting bolt, two nylon spacers,
three coved washers, locknut, and washer. Securely tighten.
2. Install the arm pad. Refer to Removing/Installing Arm Pads on page 37.
3. If needed, install the joystick. Refer to Removing/Installing the Joystick on page 41.
FIGURE 6.3 Removing/Installing Arm Tube
Arm Pad
Arm Tube
Bracket
Back Frame
Front Seat Tube
Coved Washer
Coved Washers
Mounting
Bolt
Nylon
Spacers
Washer
Locknut
Back Frame
Arm Tube
DETAIL “A” -
BOTTOM VIEW
Outside
Frame
Inside
Frame
Rear Seat Tube
Full Frame