Filter
Top Products
SECTION 7—JOYSTICK
Part No. 1125078 41 At’m and At’m QT
FIGURE 7.1 Disconnecting/Connecting the Joystick
Removing/Installing the Joystick
NOTE: For this procedure, refer to FIGURE 7.2 on page 42.
Removing
1. Disconnect the joystick. Refer to Disconnecting/Connecting the Joystick on page 40.
2. Cut the tie-wraps that secure the joystick cable to the wheelchair arm and frame. Refer
to Detail “A” of FIGURE 7.2.
3. Pull the hook-and-loop fastening strap connecting the under seat basket to the chair.
4. Cut the three tie-wraps that secure the joystick cable to the wheelchair frame.
5. Remove the two quick-release pins that mount the joystick to the arm.
6. Remove the joystick and mounting bracket assembly.
Joystick
Connector
Wheelchair Base
Battery
Pack
Connector
from Controller
Light GREY
Collar
DETAIL “A” - AT’M
DETAIL “B” - AT’M QT
Joystick
Connector
Wheelchair Base
Battery Box
Connector
from Controller
Light GREY
Collar