Filter
Top Products
SECTION 7—JOYSTICK
At’m and At’m QT 40 Part No. 1125078
SECTION 7—JOYSTICK
ƽ WARNING
After any adjustments, repair or service and before use, make sure that all attaching
hardware is tightened securely - otherwise injury or damage may result.
Before performing any maintenance, adjustment or service verify that On/Off
switch on the joystick is in the off position.
Disconnecting/Connecting the Joystick
NOTE: For this procedure, refer to FIGURE 7.1 on page 41.
Disconnecting
NOTE: Verify the joystick On/Off button is in the “Off” position before disconnecting the joystick
connector.
1. Pull the light GREY collar portion of the joystick connector and disengage the grey
collar from the controller connector.
Connecting
CAUTION
The joystick connector and controller connector fit together in one way only, DO
NOT force them together.
1. Hold the light GREY collar portion of the joystick connector with one hand and align
the joystick connector with the controller connector.
2. Lightly push to engage the joystick connector and the controller connector.