Filter
Top Products
SECTION 5—SEAT
At’m and At’m QT 36 Part No. 1125078
5. Mount the front seat tube to the seat frame with the two mounting bolts. Refer to
Detail “A” of FIGURE 5.4.
6. Install the under seat basket. Refer to Removing/Installing Under-Seat Basket on
page 34.
7. Install the arm tubes. Refer to Removing/Installing Arm Tube on page 39.
8. Install the seat. Refer to Removing/Installing the Seat on page 31.
Replacing the Seat Latches
NOTE: For this procedure, refer to FIGURE 5.5.
1. Remove the seat. Refer to Removing/Installing the Seat on page 31.
2. Turn the seat upside down.
3. Perform one of the following:
• For Rear Seat Latches - untie the release cord from the latch.
• For Front Seat Latches - remove the front seat release loop.
4. Remove mounting bolt and locknut that secures the latch to the seat frame.
NOTE: DO NOT remove the latch bolt.
5. Insert the new latch onto the frame.
6. Install the mounting bolt and locknut.
7. Perform one of the following:
• For Rear Seat Latches - insert the release cord through the hole in the latch and
secure the cord to the latch.
• For Front Seat Latches - secure the front seat release loop to the latch with the one
locknut.
8. Install the seat. Refer to Removing/Installing the Seat on page 31.
FIGURE 5.5 Replacing the Seat Latches
Mounting Bolt
Locknut
Latch Bolt
DO NOT Remove
Latch
Seat Frame