Filter
Top Products
SECTION 8—BATTERIES
Part No. 1125078 47 At’m and At’m QT
FIGURE 8.3 Removing/Installing the Battery Box on the At’m QT
Removing/Installing the Batteries From/Into the At’m
Battery Pack
NOTE: For this procedure, refer to FIGURE 8.4 on page 48.
Removing
1. Remove the battery pack from the wheelchair. Refer to Removing/Installing the
Battery Pack on the At’m on page 45.
2. Open the battery pack by performing the following -
A. Grasp the side flaps and pull up.
B. Grasp the front flap and pull up.
3. Disconnect the wiring harness from the batteries in the following order -
A. NEGATIVE (-) BLACK battery cable from the NEGATIVE (-) battery terminal on
the left battery.
B. POSITIVE (+) RED battery cable from POSITIVE (+) battery terminal/post on the
right battery.
C. WHITE battery cable (jumper) from the POSITIVE (+) battery terminal/post on the
left battery and the NEGATIVE (-) battery terminal/post on the right battery.
4. Remove the batteries from the battery pack.
Battery Box
Handle
Battery Box
Connector on
Battery Tray
Wheelchair Base
Battery Tray
Connector on
Battery Box
(Hidden from View