Filter
Top Products
SECTION 5—SEAT
At’m and At’m QT 34 Part No. 1125078
Removing/Installing Under-Seat Basket
NOTE: For this procedure, refer to FIGURE 5.3.
Removing
1. Remove the seat. Refer to Removing/Installing the Seat on page 31.
2. Unfasten the hook-and-loop fastening straps from the front and rear seat tubes.
3. Remove the basket.
Installing
1. Place the basket under the seat.
2. Fasten the hook-and-loop fastening straps around the front and rear seat tubes
3. Ensure that the hook-and-loop fastening straps are secured around the tubes.
4. Install the seat. Refer to Removing/Installing the Seat on page 31.
FIGURE 5.3 Removing/Installing Under-Seat Basket
Removing/Installing Seat Upholstery
NOTE: For this procedure, refer to FIGURE 5.4 on page 35.
NOTE: Ensure that the wheel locks are engaged and the chair is locked into place.
Removing
1. Remove the seat. Refer to Removing/Installing the Seat on page 31.
2. Remove the arm tubes. Refer to Removing/Installing Arm Tube
on page 39.
3. Remove the under-seat basket. Refer to Removing/Installing Under-Seat Basket
on
page 34.
4. Remove the two mounting bolts that secure the front seat tube to the seat. Refer to
Detail “A” of FIGURE 5.4.
5. Remove the two mounting bolts that secure the rear seat tube to the seat. Refer to
Detail “A” of FIGURE 5.4.
Hook-and-loop
Fastening Straps
Hook-and-loop
Fastening
Straps
Under-Seat Basket
Hook-and-loop
Fastening
Straps
Hook-and-loop
Fastening
Straps
Under-Seat Basket
Rear Seat
Tube
Front Seat
Tube
Rear Seat
Tube
Front Seat
Tube