Filter
Top Products
Page 208 Advanced HotSync® Operations
Preparing your communicator
There are a few steps you must perform to prepare your communicator for a wireless HotSync
operation.
To prepare your communicator for a wireless HotSync operation:
1. Press Option and then press Menu to access the Applications Launcher.
2. Tap the HotSync icon .
3. Tap Modem.
4. Tap the pick list below the HotSync icon and select Wireless Modem.
5. Tap the Enter Phone # field.
Note: If you plan to connect to your company’s dial-in server (network modem) instead of
connecting to a computer modem, see page 210.
6. Enter the telephone number to access the modem connected to your computer.
7. If needed, enter a dial prefix (such as “9”) to access an outside line, and then tap the Dial
Prefix check box.
Tip: You can enter a comma in the field to introduce a “pause” in the dialing sequence.
Each comma equals a two second pause.
8. Select the Disable call waiting check box to avoid an interruption during the wireless HotSync
operation.
9. If you want to use a calling card to place the call, select the check box and enter the calling
card number.
10. Hold Option and press Return to finish.