Filter
Top Products
14. PROGRAMMING MODE EO1-31009
14.12 Vendor Setting
14-42
14.12 Vendor Setting
You can set the vendor names with this menu.
The following screen will appear when the [Vendor] key of the Programming Mode Main Menu is
touched.
Key Functions
Key Function
SEARCH CODE Used to search the desired vendor No. and display it on top of the list.
ADD Used to add a new vendor.
COPY Used to copy the data to other vendor No.
DELETE Used to delete the desired vendor No.
CHANGE CODE Used to change the vendor No.
Procedure
Item Procedure
Adding a new vendor 1. Input 2-digit vendor No. (01 – 99)
2. Touch the [ADD] key.
3. Touch the data entry area and enter the data.
Selecting a vendor No. and
editing the vendor
1. Touch the Vendor No. area.
2. Touch the same Vendor No. area again to edit the vendor name
(max. 24 characters).
Searching a vendor No. 1. Input the vendor No. you desire to search.
2. Touch the [SEARCH CODE] key.
Copying the vendor 1. Touch the vendor No. area of copy source.
2. Input the vendor No. of copy destination.
3. Touch the [COPY] key.
Deleting the vendor 1. Touch the vendor No. area to be deleted.
2. Input the vendor No.
3. Touch the [DELETE] key.
Changing the vendor No. 1. Touch the vendor No. area you desire to change.
2. Input a new vendor No.
3. Touch the [CHANGE CODE] key.
NOTE:
When the already existing vendor No. is input for the copy or No. change operation, a beep tone
sounds and an error message is displayed. Overwrite ([GO] key) or cancel ([Cancel] key) the
operation.
CHANGE CODE key
Vendor No. area
DELETE key
COPY key
ADD key
SEARCH CODE key
Vendor Name area