Filter
Top Products
16. REGISTRATION MODE
EO1-31009
16.2 Basic Operations
16-19
16.2.4 Tare Subtraction/Cancellation/Save
There are 5 ways of tare subtraction:
1) When a tare is unknown.
2) When a tare is known.
3) When a tare is preset to the PLU.
4) When a certain percentage of the weight is subtracted as a tare.
5) When a certain percentage of the weight is preset to the PLU as a tare.
Unknown Tare Subtraction
1. Place a container on the platter.
2. Touch the [TARE] key or the Tare area. The tare is displayed on the Tare area, and “NET” is
displayed on the Weight area.
Known Tare Subtraction
1. Input the tare with the numeric keys and then touch the [TARE] key or Tare area. The entered
tare is displayed on the Tare area, and “NET” is displayed on the Weight area. The tare is
subtracted from the weight in advance.
Example: Tare is 0.100 lb
NOTES:
1
. To clear the tare before weighing a commodity, remove the container from the platter, and then touch the
[Tare] key or Tare area. The displayed tare and “NET” will be cleared. (This function cannot be used on
the CA model.)
2. After weighing a commodity and removing it together with the container, the tare will be automatically
cleared.
3. Touching the [SAVE] key after entering the tare retains
the tare data even after the commodity is removed from
the platter. This function is useful when repeatedly
weighing different commodities using the same container.
In this state, “PREPACK” is displayed on the Tare area.
Tare area
Weight area
“NET”
“PREPACK”
TARE area
TARE key
“NET”
Weight area