Filter
Top Products
16. REGISTRATION MODE
EO1-31009
16.1 Programming for the Registration Mode
16-10
16.1.7 Logo Assignment
You can select a logo to be printed on the label.
This operation should be performed after calling a PLU. Even if a logo has been preset to the PLU, the
logo selected in this menu has priority over the preset one. When another PLU is called or the
Registration Mode is terminated, the selected logo is cleared. Please be certain that the label format
can accommodate a logo. For label format information, refer to Section 15.2.
The following screen will appear when the [LOGO] key of the Registration Mode Programming screen
is touched.
Key Functions
Key Function
BACK Used to return to the Registration Mode initial screen.
0 – 9 Used to input numeric data.
C Used to clear the entered data.
RESET Used to cancel the selection of logo.
SEARCH CODE Used to search the desired logo No. and display it on top of the list.
LOGO1 TEMP –
LOGO 3 TEMP,
FSP TEMP,
COUPON TEMP,
BONUS TEMP
Used to temporarily assign a logo in place of the one preset to the PLU.
After a label is issued or the Registration Mode is terminated, the temporarily
assigned logo will be cancelled.
SLOT 0, SLOT 1 Displayed only when a flash memory card is inserted.
NOTE: A logo can be also selected by using the [LOGO] key on the Registration Mode initial screen if this
key has been assigned to the screen by the SFKC setting.
Procedure
Item Procedure
Selecting the Slot 0 or Slot 1 Touch the Slot 0 or Slot 1 key.
NOTES:
1. The slot number into which a flash memory card is inserted is displayed.
2. Logos saved in the inserted flash memory card are displayed on the
screen.
Assigning the logo 1. Touch the [LOG 1 TEMP], [LOGO 2 TEMP], [LOGO 3 TEMP], [FSP
TEMP], [COUPON TEMP], or [BONUS TEMP] key.
2. Touch the desired logo image.
NOTE: Regarding the logo format, refer to Section 14.2.
RESET key
SLOT 0 and SLOT 1 keys
LOGO No.
BACK key
SEARCH CODE key
LOGO 1 TEMP to LOGO 3 TEMP,
FSP TEMP, COUPON TEMP, BONUS TEMP keys