Filter
Top Products
14. PROGRAMMING MODE
EO1-31009
14.9 Store Name/Address Setting
14-30
14.9 Store Name/Address Setting
You can set the store name and address with this menu.
The following screen will appear when the [Store name/Address] key of the Programming Mode Main
Menu is touched.
Key Functions
Key Function
SORT Used to defragment the data in the flash ROM.
Since this machine uses the flash ROM, repeated data input may disable the data entry
in spite of sufficient memory capacity. (“Memory not enough error” will appear.)
When the [SORT] key is touched, the confirmation screen will appear. To execute,
touch the [GO] key, or [CANCEL] key to cancel.
It takes a while to complete the data sort.
SEARCH CODE Used to search the desired address No. and display it on top of the list.
ADD Used to add a new store name/address.
COPY Used to copy the data to other address No.
DELETE Used to delete the desired address No.
CHANGE CODE Used to change the address No.
Procedure
Item Procedure
Adding a new store
name/address
1. Input a new address No. (1 – 50)
2. Touch the [ADD] key.
Selecting the store
name and editing the
store name
1. Touch the store name area.
2. Touch the same store name area again to edit the store name (Max. 32
characters x 1 line).
Selecting the address
and editing the address
1. Touch the address area.
2. Touch the same address area again to edit the address (Max. 32 characters x
2 lines).
Searching an address
No.
1. Input an address No. you desire to search.
2. Touch the [SEARCH CODE] key.
Copying the store
name/address
1. Touch the address No. area of copy source.
2. Input the address No. of copy destination.
3. Touch the [COPY] key.
Deleting the store
name/address
1. Touch the address No. area to be deleted.
2. Input the address No.
3. Touch the [DELETE] key.
Changing the address
No.
1. Touch the address No. area you desire to change.
2. Input a new address No.
3. Touch the [CHANGE CODE] key.
NOTE: When the already existing address No. is input for the copy or No. change operation, a beep tone
sounds and an error message is displayed. Overwrite ([GO] key) or cancel ([Cancel] key) the
operation.
Address No. area
Store Name area
Address area
CHANGE CODE key
DELETE key
COPY key
SORT key
SEARCH CODE key
ADD key