Filter
Top Products
19. REPORT/RESET MODE EO1-31009
19. REPORT/RESET
MODE
19- 1
19. REPORT/RESET MODE
In the Report (Read) Mode, you can issue programmed data on journal paper and total data registered
in REG/REWRAP/MARK DOWN Mode on journal paper or screen.
In the Master/Satellite System, registered total data can be uploaded from the Satellite Scale to the
Master Scale.
In the Reset Mode, you can print total data registered in REG/REWRAP/MARK DOWN Mode on
journal paper and reset it. Also you can display registered total data on the screen, which will not be
reset.
How to enter the Report/Reset Mode Main Menu
[MAIN MENU] [REPORT] or [RESET]
The following Report/Reset Mode Main Menu screen will appear when the [REPORT] or [RESET] key
of the main menu is touched.
Report/Reset Mode Main Menu screen
The following keys will be used through the Report Mode. As many other keys appear on the screens
hereinafter, refer to the following sections.
Key Functions
Key Function
BACK Used to return to the Main menu.
0 - 9 Used to input numeric data. The input number is displayed on the Numeric window on
the left side of the [1] key.
C Used to clear the input numeric data.
Used to scroll the screen.
Back key
Scroll Bar
Clear key
Numeric Window
Numeric key
Report Item
area
Mode: REPORT or RESET
REPORT mode
only
(Refer to Menu
table.)