Filter
Top Products
9. OPERATION PANEL EO1-31009
9.3 Layout of the Operation Panel
9- 3
(1) Preset tare lamp: Lights when a tare preset to the PLU is called. (See NOTE.)
(2) Tare: Max. 4-digit tare is displayed.
(3) Weight: Max. 5-digit weight including “−“ mark is displayed.
(4) BACK key: Used to return to the previous screen.
(5) Commodity: A commodity name is displayed.
(6) Unit price: Max. 4-digit unit price is displayed.
(7) Total price: Max. 5-digit total price is displayed.
(8) Speed keys: You can freely program these keys by SFKC setting.
(9) Function keys: You can freely program these keys by SFKC setting.
(10) Scale mode: Current state of the scale is displayed (Weigh/By-count/Fix).
(11) Operating mode: Current operating mode is displayed (REG. NORMAL (Label)/REG. MARK
DOWN/REG. REWRAP).
(12) Date and Time
(13) AUTO/MANUAL lamp: The current label issue method is displayed.
(14) PREPACK (tare) lamp: Lights when the called PLU data or tare is retained.
(15) NET lamp: Lights when a tare is entered. In this case, a net weight will be displayed
on the Weight area.
(16) PREPACK (Unit Price) lamp: Lights when the called PLU data is retained.
(17) ZERO lamp: Lights when a tare is not set or nothing is placed on the platter (weight is
zero).
NOTE: With the initial settings, PLU preset tare function cannot be used. If you desire to use this function,
please contact the nearest TOSHIBA TEC service representative or sales agent.