Filter
Top Products
16. REGISTRATION MODE
EO1-31009
16.1 Programming for the Registration Mode
16-11
16.1.8 Grade Line Assignment
You can select the grade line to be printed on the label with this menu.
This operation should be performed after calling a PLU. Even if a grade line has been preset to the
PLU, the grade line selected in this menu has priority over the preset one. When another PLU is called
or the Registration Mode is terminated, the selected grade line is cleared. Please be certain that the
label format can accommodate a grade line. For label format information, refer to Section 15.2.
The following screen will appear when the [GRADE LINE] key of the Registration Mode Programming
screen is touched.
The grade line data should have been programmed with the grade line setting menu in the
Programming Mode (Refer to Section 14.7.)
Key Functions
Key Function
BACK Used to return to the Registration Mode initial screen.
Procedure
Item Procedure
Selecting a grade line Touch the desired grade line. The selected grade line is shown in pink.
NOTE: Grade line can be also selected by using the [GRADE LINE] key on the Registration Mode initial
screen if this key has been assigned to the screen by the SFKC setting.
BACK ke
y